1.30.245.303/0800 | RAFI

Keylock switch, 1.30.245.303/0800, RAFI

RAFIX control units are modular units consisting of several parts. In the RAFIX 22 QR family, they always consist of an actuating element, coupling and switching element. Then this unit is snapped onto the key switch. To release, a bayonet lever must be actuated. RAFIX 22QR key switches have the specified tactility and function only when assembled with the appropriate switching elements. You can choose between two collar shapes: round and square.

The mounting diameter is 22.3 mm according to the standard. The anti-rotation lug can be easily removed with a screwdriver if necessary. The locking systems we use were created according to the DIN EN 1303 standard by well-known lock manufacturers. They are open, mechanical systems which, depending on the environmental conditions, require occasional maintenance by the machine or system operator.

Features

• Design adaptations through different front ring colors
• Robust - suitable also for operation with gloves
• Firmly injection-molded collar seal, cannot twist or be lost during installation
• Additional protection against twisting due to threaded ring with claw
• Separate switching elements required

Applications

• Measurement-control-regulation
• Electrical engineering
• Mechanical and system engineering
• Vehicle construction